News

Scott Bader Promoting High Performance Adhesives and FRP Composite Materials at SAMPE Seattle 2017

Scott Bader Promoting High Performance Adhesives and FRP Composite Materials at SAMPE Seattle 2017

Scott Bader North America (Booth B25) is exhibiting its range of high performance resins, gelcoats, bonding pastes and structural adhesives for the production of composite tooling and molded parts at SAMPE Seattle 2017.  This year the SAMPE USA technical conference and exhibition runs from 22 – 25 May at the Washington State Convention Center in Seattle. These regional events are organized around the world by The Society for the Advancement of Material and Process Engineering (SAMPE), providing a technical forum to find out about the latest new materials and processes, emerging innovations and proven technology advancements. 

Special focus during the exhibition will be given to the Crestabond® range of primer-less MMA adhesives, which are now widely used in assembly by OEMs and tier 1 and 2 manufacturing companies for a variety of structural applications and substrates, with little if any need for surface preparation or a primer. All Crestabond products are toughened, two component methacrylate adhesives, developed for bonding not only unsaturated polyesters, vinyl esters and epoxy glass and carbon fiber FRP composite parts, but also wood, balsa and synthetic foam cores, engineering thermoplastics and metals. The Crestabond range of 10:1 and 1:1 ratio adhesives meet the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts. There are now ten Crestabond grade options, offering fixture times from 2-3 minutes up to 4 hours, with gap filling up to 50mm (2”).  Application can be via a manual hand gun with 400ml cartridges, or using a dispensing machine and pneumatic gun with 5 gallon pails or 55 gallon drums of Crestabond for higher volume applications.

The Crestapol® range of high performance urethane acrylate resins will also be promoted at the Scott Bader booth during SAMPE, in particular the closed mold Crestapol1250LV infusion grade, which is compatible with carbon and aramid as well as glass fiber reinforcements. According to Scott Bader, Crestapol 1250LV resin has been specified for parts where a combination of lightweight with very high toughness and strength is needed in the FRP laminate design, such as for motorsport chassis and body panels, and for competitive kayaks. In the USA, Crestapol 1250LV has also been used in a replica aircraft development project in combination with carbon/ Innegra™ hybrid woven fabric reinforcements, cores and other reinforcements to vacuum infuse the outer composite skin CFRP fuselage halves which attach to the steel fuselage frame of a replica American WW2 fighter aircraft. 

Most of the Crestapol grades are very low viscosity resins, designed to be processed at room temperature and to rapidly cure, with no need for post cure. The inherent toughness of the urethane acrylate chemistry provides Crestapol resins with very high mechanical performance, even at high mineral filler loadings. Crestapol resins can be processed by open molding, infusion, RTM and pultrusion, even when heavily ATH filled (up to 200phr) to meet stringent fire approvals. Laminate systems based on Crestapol resin meet a variety of fire, smoke and toxicity (FST) standards specified for buildings, rail, metro and other mass transportation applications.   

Lassi Ojanen, Business Development, Scott Bader North America, commented: “It is great to be exhibiting at SAMPE again, which is a key event where we always make quality contacts with people from manufacturing companies in key industry sectors looking for materials solutions, not only from North America, but also overseas visitors.”  Representatives Lassi Ojanen and Al Horsmon will be available at the Scott Bader booth to answer questions about the complete range of resins, gelcoats and structural adhesive high performance products available for advanced composites applications.  For more information visit www.scottbader.com/na .