| |
| | | |
|
Chomarat Products
Chomarat Glassfiber products are available in Norway, Finland, Sweden, Iceland and the Baltics through Scott Bader Scandinavia AB. Also available in UK and Ireland through Scott Bader UK and Eire.
a
Woven & speciality reinforcements
* Woven Roving
* Multiaxial Products
* Combination Products
* Narrow Tapes
* Rovicore
* Roviply
* Matline
Main Applications
* Wind generator
* Boat hulls
* Transportation
* Sports equipment
* Tanks
* Panels
* Profiles
| 
 |
a
WOVEN ROVINGS Properties
* Made of continuous, untwisted E-glass direct roving, kevlar, carbon or combinations
* Compatible with polyester, vinylester and epoxy resins
Products available
CHOMARAT woven rovings are available in several types of constructions with cut edges or with fringes 1 to 2 cm long. The indicated width does not include fringes |
Weights 140 - 2100 g/m2
Widths 2,5 - 300 cm
Weave types plain, twill, satin | |
COMBINATION PRODUCTSProperties
* Consist of two or more reinforcing layers, typically woven roving and chopped strands
* Compatible with polyester, vinylester and epoxy resins
* Time saving, lower labour costs
* Possible to laminate large quantities of glass at the same time
* Additional layers can be combined, like surface tissues or core materials
* Stitched and power bonded types available |
| Products available
Weight of woven part 300 - 1500 g/ m2
Weight of mat layer 100 - 600 g/m
Widths 10 - 250 cm
Standard width 125 cm |
MULTI-AXIAL PRODUCTSProperties
* Consists of one or more layers of unidirectional fibres
* Reinforcing fibres can be in directions like 0, 90 and ± 45, also chopped strand layer can be added
* Optimal fibre orientation
* Excellent drapability, better tensile and flexural properties
* Compatible with polyester, vinylester and epoxy resins
Products available
Weights 400 - 2 000 g/m2
Standard width 127 cm |
|
ROVICORE
* Reinforcement complex, consists of a synthetic non-woven core, made from large diameter fibres, sandwiched between chopped glassfibre, and mechanically stitched together.
The thickness of the complex, the strength of the core, the tex and sizing on the fibres, the high permeability of the resin, the quick wetting out capacity, and its specific characteristics make ROVICORE a particularly ideal reinforcement for moulding GRP parts using closed mould techniques. Also available as COREGLAS when increased glass content is required.
a |
Characteristics
Good deformability
Compressibility
Easy resin flow
Good surface finish
Sandwich-type composite
Good mechanical properties in flexion
a | | a
Cold pre-shaping
Easy-to position reinforcements
High wetting capacity
Flexibility
High temperature resistance
Increased productivity |
Product identification
Rovicore 450/B5/450 (I)
Coreglass 450/CG5/450 I | 450 = Glassfibre weight/m2
B5 or D3 Type of Core B5=250gr/sqm, D3=180gr/sqm
CG5 = Type of core which includes 50% glassfibre
(I) = Type of glassfibre |  |
|
a a
Multi axial non-crimped LIBA stitch bonded fabric.
| ROVIPLY
 | |
| Objectives: | Optimisation of the fibres orientation
Increase torsional strength
Isotropy of directions |
| Advantages | High Mechanical properties
Weight saving
Very easy to handle
Comformability
a | |
| | |
www.chomarat.com
|
| |
| |
