| |
| | | |
|
Reinforcements
GLASSFIBRE Glassfibre Chopped Strand Mats:- Emulsion Bounded EM 1002/100/125, 1002/150/125, 1002/225/125
- Emulsion Bounded ACE 450-92, ACE 600-92
Emulsion Bound Mats EM 1002 with densities 100, 150 and 225 gr is manufactured of chopped strands 9m in diameter, drawn from E-Glass containing below 1% of alkali's. Recommended as external layer for improvement of surface aspect.
Chopped Strand Mats with densities from 300, 450, 600 and 900 gr. Fibre diameter is about 12m. Roll widths 90 or 125 cm- 1002/ACE = Emulsion Bounded
- 1004 = Powder Bounded
|
|
Spray Gun Rovings
Spray Gun Rovings ERS240T132 - 2400 TEX, ER10, ER12-2400 TEX DNV APPROVAL S
Filament diameter 11 +-1 m |
Filament Winding Rovings
Filament Winding Rovings ER 469 - 2400 TEX
Filament diameter 23+- 1 m
Pultrusion Roving
Pultrusion Roving
Single End E-Glass ER 469 - 4800 TEX
Filament diameter 14 m
Loss of ignition 0.60+-0.20 |  |
|
SURFACE MATS
Acrylic Surface Mats ACR-65 Non-woven fabric, 65 g/m2. Improves the aspect of the laminate when applied on direct contact with the mould or after a gelcoat. Has a high porosity and elongation, which improves the good air and resin flow.
Roll length: 200 lm – width 130cm
Glassfibre Surface Mats ACM1 30 gr/m2. The glass veil is composed of dry-laid randomly dispersed glassfibre strands bonded with resin. The material is designed to provide a gel-coat reinforcement and a smooth resin-rich surface to the composite.
Roll length: 250 lm – width 100 cm |
|
 | NIDACORE Structural Honeycomb Material
- Balsa Core Materials
- Structiso/Structiform Cores for RTM, Infusion or other vacuum processes | |
|
| Balsalite Core Materials BalsaLite is select quality, kiln-dried, end-grain balsa wood suitable as a structural core material in composite sandwich construction.
BalsaLite is a naturally renewable resource.
BalsaLite is available as a surface primed version of BalsaLite, which improves installation quality, shortens application time and reduces resin absorption.
Balsalite by Nida-Core is available in a variety of forms chosen for specific applications or processes. :
1. R – is a rigid variety. It is not scored or scrimmed nor is it sealed. It is used predominantly in flat panel construction.
2. FPS – is a scrimmed and scored variety that is not seal coated to reduce resin consumption. It is used in applications where simple and compound curves may be encountered
3. S2S – is a scrimmed and scored variety that has been seal coated to reduce resin consumption and enhance bond.
4. IG – is an infusion grade of balsa that has been perforated and the
faces channelled for resin distribution. | 
|
| | |
| Nidafusion STO and STF The Sandwich with triangulated bonds PRINCIPLE
A 3-dimensional fibreglass reinforced foam for fabrication of high-stiffness low-density structures either flat or highly shaped.
APPLICATIONS
Automotive, Insulated doors, Shipbuilding, Railway Industry, Industrial
ADVANTAGES
Excellent Flexural Rigidity. Not sensitive to loss of strength at elevated temperature as opposed to PP Honeycomb or PVC Foam
Exceptionally resistance to de-amination, providing superior damage tolerance andfatique resistance.
CONFIGURATION
Sandwich constructions are made of:
-Closed Foam Cores
-Fiberglass Reinforcement on each side of the foam
-Fiberglass Roving going through the 3 above elements and forming triangulated bond
FABRICATION
Low Pressure Press, RTM Process, Infusion, Any Vacuum Process
Nidafusion STO: Sheets of 2,5 x 1,25 m with polyurethan 35 kg/m3
Nidafusion STF: Sheets of 2,75 x 1,20 m with polyethylene 35 kg/m3 |  |
|  |  |
 |
| |
| |
