|
Crystic & Crestomer
 | CRYSTIC GENERAL PURPOSE RESINS | |
2-446PA/PALV*
2-420PA/PALV*
PD7959PA* | LSE. Rapid wet out. Low exotherm
LSE. Resin for multi-layering. Low exotherm
Non LSE. Low exotherm resin, having longer gel time to permit moulding of large structures and multi-layering. | Orthophthalic
Orthophthalic
Orthophthalic |
| 4252.4 | Spray. LSE, pre-accelerated resin. Can be used when fast mould turn-round or thick laminates are required. High HDT. | Orthophthalic |
Filabond 2010PA
U 904 LVK | General purpose resin.
Pre accelerated, non thixotropic low viscosity resin for RTM Light/Vacuum Bagging. Rapid hardening and limited exotherm. | Orthophthalic
Orthophthalic |
|
| CRYSTIC HEAT & CHEMICAL RESISTANT RESINS | |
199
397PA*
491PA/489PA*
PD7925PA | Suitable for high temperature use and electrical applications.
High chemical resistance and High HDT.
Thixotropic high performance resin.
LSE High Performance. Suitable for marine application. | Isophthalic
Isophthalic/NPG
Isophthalic
Isophthalic |
|
| CRYSTIC FIRE RETARDANT UNFILLED RESINS | |
385PA
388 | Light stabilised resin. BS476 part 7 class 2.
Light stabilised resin for machine made sheeting of good clarity. Class 1/'0' | Iso/HetAcid
DBNPG |
|
| CRYSTIC FIRE RETARDANT FILLED RESINS | |
356PA
1355PA
U918T | Class 1/'0' system with Gelcoat 65PA for superior weather resistance.
Class 1/'0'.
LSE Without Halogen. German Std DIN 5510 S4,SR2,ST2 | DBNPG
Orthophthalic
Orthophthalic |
|
| CRYSTIC GELCOATS | |
| Brush Gelcoat | | |
14PA
D5204PA* | NEW Tooling gelcoat, Extremely good gloss retention & high gloss
Excellent weather and water resistance. | Modified Vinylester
Isophthalic |
| Spray Gelcoat | | |
LS-98PA*
G967 SMK | Low Styrene. Excellent water and weather resistance.
NEW Spray, sanitary high thermal shock resistance | Isophthalic
Isophthalic/NPG |
| Topcoat | | |
X103 KH
X101S | Brush. General purpose. Fast curing.
Spray. General purpose. Fast curing. | Orthophthalic
Orthophthalic |
|
| CRYSTIC BONDING PASTES | |
2655 PA white
1056 TRPA
3941
1075 FV PACC | Filled, flexible for gap filling and bonding
Highly thixotropic, good elongation an low exoterm
With Glasfibre, 70 microns, natural colour
NEW With Glasfibre, 3mm, white | Orthophthalic
Iso
Ortho
Ortho |
*Has approval or acceptance by Lloyd´s Register for use in the construction of craft under their survey
NEW High Performance
MATCHED TOOLING SYSTEMS |
Crystic Gelcoat 14PA
A urethane modified Vinyl ester brush gelcoat, which has excellent gloss retention and exceptional resilience. It has good chemical resistance and offers a genuine solution to the problem of 'water marking'. It also reduces general reinforcements print-through. Crystic 14 PA is available in red, orange, grey, green, black and translucent.
HDT 100 o
Elongation 3,5 %
|
Crystic VE 679PA Skin Coat
An easy to use Vinyl ester / DCPD skincoat which significantly reduces the occurrence of fibre print through, to produce durable mouldings with an enhanced surface finish.
HDT 94 o
Elongation 2,1 %
|
Crystic Fastlam 3000A - Rapid Tooling Resin
Fastlam 3000A tooling resin is a pre-accelerated, low profile, thixotropic resin specifically designed for rapid tool making. Fastlam offers the user the qualities of zero shrink, the ability to use the resin even at low temperatures, good handling and rapid cure. Post curing is usually unnecessary. Being dimensionally stable, Crystic Fastlam 3000A helps eliminate surface distortion. Recommended hardener is: Akzo Perkadox CH50X powder.
HDT 80 o
Elongation 2,0 %
|
Crystic 474PA - Heat and Chemical Resistant Laminating Resin
Is a thixotropic, pre-accelerated polyester resin with good heat and chemical resistant properties. It is ideally suitable for the production of heat resistant, dimensionally stable moulds.
HDT 112 degree C.
|
|
Crestomer Products
WHY CRESTOMER? Crystic Crestomer Structural Adhesive products exhibit exceptional impact strength and toughness. Gives performance consistency over a very wide spectrum of temperatures (-5 to 30 degrees C). Crestomer was established 15 years ago and is used in a wide range of applications across marine, transport, building and construction sectors.
Crystic CRESTOMER Structural Adhesives offers advantages as:Facilitation of new design approaches Less need of mechanical fastenersTime Savings and cost reductionsGreater efficiency through effective load distributionJointing and sealing in one operationReduced emissionsWeight reductions |
|
| CRESTOMER RESINS | |
1080
1220PA* | Impact resistant resin/modifier.
Tough flexible laminating resin. | 25 kg & 200 kg
25 kg & 200 kg |
|
| CRESTOMER ADHESIVES | |
1152PA*
1186PA*
1196PA* | Resilient structural connections for high performance
High strength structural adhesive
For lightweight core bonding. Low density | 25 kg & 200 kg
25 kg & 200 kg
15 kg |
|
CRESTOMER ADVANTAGE High performance structural adhesive for convenience, speed and flexibility. 100% Elongation.
CrestomerAdvantage 10* and 30* Pre packed grade in co-axial cartridges 380ml or 25 kg |
|
CRYSTIC STONECAST – Solid Surface An exiting new range of high performance Resins, Spray Gelcoats and Granite Effect Chips for solid surface and spray granite surfaces. Developed to meet the highest performance standards, Crystic Stonecast Solid Surface and Spray Granite deliver:PerformanceDurabilityStyle |
| Crystic Stonecast R935PA | ISO/NPG quality developed for casting of Solid Surface High Clarity, Low Colour, acrylic modified resin. |
| Crystic Stonecast Gelcoat 95PA | ISO/NPG Gelcoat formulated to accept Poly Stone coloured chips and be able to be spray applied by different methods available. Poly Stone Coloured Chips Available in a number of different colours |
| Poly Stone Chips | Available in a number of different colours | |
Find out more detailed information about Crystic® Polyester Resins Gelcoats, Bondingpastes, and a unique range of Crestomer® performance resins and adhesives
By using the links below.
| | | | | |
Crystic Brand | Resins | Compounds | Gelcoats | Structural Adhesives | Pigments |
|
