Return to Group Home
  
Texipol®

Print the Body of the page

Texipols are specialised inverse emulsions used as thickeners. Scott Baders manufacturing and technical capability has enabled the manufacture of polymers with optimum performance characteristics and ease of transport, handling, storage and use benefits. They have a low viscosity enabling them to be pumped and metered easily.

In general most Texipols are supplied in a pre-neutralised form which means that there is no requirement for additional alkali or surfactant addition to effect thickening. In most applications, Texipol can be added at any stage of formulating, including post thickening of systems, thus allowing greater flexibility when formulating.


Product No. Description NVC % Relative Density Viscosity mPaS pH Polymer Type MFFT°C Tg°C Click to View
TEXIPOL - Building & Decoration
TEXIPOL 63-202 Anionic inverse emulsion thickener for water based caulks, adhesives & sealants N/A 1.05 4000 5.5 - 9 (pH usage range) Anionic inverse emulsion N/A N/A



Product No. Description NVC % Viscosity mPaS pH Av mg KOH g-1 Colour Solvent Oil Type Click to View
TEXIPOL - Industrial coatings
TEXIPOL 63-510 Anionic inverse emulsion particularly good at thickening acid & alkali solutions. N/A 5000 1-14 (pH usage range)







Product No. Description SURFACTANT NVC % Viscosity mPaS pH Tg°c Click to View
TEXIPOL - Textiles & Furnishings
TEXIPOL 63-201 High efficiency thickener for carpet backing compounds N/A 5,000 5.5 - 9.0 (pH usage range) N/A

TEXIPOL 63-237 Pigment printing thickener, good all round performance with universal pigment and binder compatibility n/a 4,500 5.5-9.0 (pH usage range) n/a





TEXIPOL 67-5055 Inverse emulsion thickener for Chromojet printing N/A N/A 15,000 6.5 - 7.5 (pH usage range) N/A


This is the standard product range for the Texipol brand. It is representative of the wide selection of products Scott Bader can offer. As a Speciality manufacturer, we will also discuss tailoring products to meet your specific application needs


Values given are an indication of characteristics and should not be taken as a supply specification.

click to go back


Terms & Conditions  |  Head Office  |  Site Map  |  Contact us  |  Online Library