Name: Crestapol® 1250 Urethane Acrylate Resin
Brand: Crestapol®
SKU: f6e7a743-f602-429b-aeb1-e2cda4fa9d41

Crestapol® 1250 Urethane Acrylate Resin

Crestapol 1250 is a low viscosity urethane acrylate resin. It is designed for pultrusion with maximum wet out for fibreglass, carbon fibre and other similar fibres. Though run times will vary depending on the complexity of the die, this resin can run very fast, resulting in very efficient pultruded products. It is very tough and has high strength, creating composite parts that have excellent water and hydrolysis resistance. The resin has a fast cure, of just 5 hours at 80°C or 24 hours at 20°C, making it ideal for applications that require multiple components. Crestapol 1240 is also highly weather-resistant, showing little degradation in the finish when exposed to UV light, and is therefore suitable for multiple external applications.

Crestapol® 1250 Urethane Acrylate Resin

Fast high strength resin for pultrusion

Mixed colourYellow, Brown
Tensile strength76 MPa
Tensile modulus3.6 GPa
Shelf life12 months
Elongation at break2.7%
Viscosity at 25°C2.25

Designed for pultrusion with maximum wet out for fibreglass, carbon fibre and other similar fibres. Ideal for applications that require multiple components

Fast high strength resin for pultrusion

Supplied in either 25kg/6.6 gallon, 200kg/53 gallon and 1000kg/264 gallon containers

Store at 25^oC/ 77^oF in the original, unopened container in a dry, well ventilated place. Protect from freezing and direct sunlight

Please see separate material safety data sheet