Name: Texipol 63-202
Brand: Texipol®
SKU: a9e57c3e-71fc-478d-9c83-c552e845c4a2

Texipol 63-202

A rheology modifier that imparts pseudo-plastic properties to aqueous-based compositions. As an inverse emulsion thickener, it can be used in a wide variety of aqueous binder systems including PVA, SBR, and acrylic and styrene acrylic copolymers, and various adhesive, sealant and coating formulations.

Texipol 63-202

A rheology modifier that gives pseudoplastic flow to water-based formulations

Shelf life48 months
Viscosity at 25°C1500 mPa s
Specific gravity at 25°C1.05

Supplied as an easy to use, low viscosity liquid that gives almost instantaneous thickening when mixed directly into aqueous formulations. As the polymer is already in solution it does not require any neutralisation or addition of other additives to promote thickening

Can be used to thicken a variety of aqueous binder systems including; PVdC and acrylic and styrene acrylic copolymers. It has been used in various adhesive, sealant and coating formulations. Like other TEXIPOL® thickeners it can thicken systems as low as ~ pH 5, but is most efficient at pH>7. Typical thickener dosages are probably 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels

A rheology modifier that gives pseudoplastic flow to water-based formulations

Available in drums, IBCs and bulk deliveries by road tanker (please check with your local representative)

Store between 0 and 30°C in the original, unopened container in a dry, well ventilated place. Exposure to direct sunlight should be avoided

Please see separate material safety data sheet