Crestomer®

Crestomer® 1152PA Structural Adhesive

Crestomer 1152PA is a market leading pre-accelerated two-part structural adhesive based on unsaturated urethane acrylate in a styrene monomer. This leading Scott Bader adhesive has excellent fatigue and impact resistance as well as reduced styrene emissions. Crestomer 1152PA offers low exotherm during cure for low risk of print through, over 100% elongation for a truly flexible structural adhesive and its easy to applying, saving you time and cost.
Download TDS

Crestomer® 1152PA Structural Adhesive

Urethane acrylate structural adhesive

  • Working time50 minutes
  • Recommended application temperatureAbove 15°C/59°F
  • Gap filling1–25 mm/0.04 - 1.0 inch
  • Fixture time10 hours
  • Specific gravity1.05
  • Mix ratio by volume50:1
  • Tensile strength22 - 25 MPa
  • Tensile modulus1000 - 1500 MPa
  • Tensile elongation100 - 120%
  • Shelf life12 months

Crestomer 1152PA has powerful and reliable adhesion to FRP laminates, wood, core material and metals, it can also be used as a general-purpose adhesive. Some of the recommended substrates include marine ply, vinyl ester and stainless steel

Urethane acrylate structural adhesive

Lloyds, RINA, DNV.GL and Class NK

Store between 2oC - 23oC/36oF - 73oF in the original unopened container

Supplied in either 25Kg/55lbs or 200Kg/440lbs containers

Please see separate material safety data sheet

Download TDS
Urethane acrylate base

Urethane acrylate base

Improved aesthetics and better surface finish.

Excellent retention of toughness

Excellent retention of toughness

High elongation at break and excellent adhesion.

Trusted for over 40 years

Trusted for over 40 years

Tried, tested and loved by the worlds largest boatbuilders for decades.

Highly thixotropic

Highly thixotropic

No sagging on vertical surfaces.

Additional documents

Packing types

Cartridges

Holds 490ML

Pails

Holds 20L

Kegs

Holds 25KG

Drums

Holds 225KG

IBCs

Holds 1000L

Tankers

Holds over 1000L