Search

Crestafix® F26 Polyester-Based Compound

Crestafix F26 is a water resistant, low-density polyester-based fairing compound. Crestafix F26 has good adhesion to cured fibre-reinforced polyester and vinylester laminates. Crestafix F26 sands easily, gives a hard finish after a full cure, yet is not brittle and has good impact strength. Crestafix F26 is a suitable base for all marine finishes such as polyester, urethane and epoxy paints.

Crestafix F26 is often covered, prior to painting, with our sprayable polyester-based primer Poly-Fill to hide surface imperfections and pinholes in order to obtain a high-quality finish. Below the waterline, they must be covered with epoxy bottom paints, or we recommend to use Poly-Fair F24VE, the vinylester version of Crestafix F26. Crestafix F26 fairing compound is used primarily in the boat building and fiberglass fabrication industries for fairing and sanding plugs, moulds, one-off custom boats, fairing of lead keels (if not coated with epoxy), fairing of keel-to-hull joints, repair of damaged fibreglass parts and mould re-work or modification.

Data sheets

Brochures

Contact Us


    Crestamould - Matched Tooling Systems

    CELEBRATING A CENTURY OF PARTNERING FOR SUCCESS

    From everyone at Scott Bader, we would like to express our sincere appreciation to all those who have supported us over the past 100 years.
    With this deep appreciation in our hearts, we enter the next 100 years...

    FIND OUT MORE