Name: Crestaform Castable FND
Brand: Crestaform
SKU: 1e29b602-8a09-4c0e-b1ab-6b9bb282ef39

Crestaform Castable FND

Crestaform® Castable FND is a specialist 3D-printing resin developed to produce highly detailed sacrificial patterns for investment casting. Combining fine feature definition, a smooth surface finish and dimensional accuracy, it is suited to foundry applications ranging from industrial components to art casting. The formulation delivers clean burnout with low residual ash and low expansion during the burnout process, helping preserve mould integrity and support consistent casting results. Crestaform® Castable FND is compatible with open-system 385 nm and 405 nm mSLA/LCD and DLP vat-based 3D printers.

Crestaform Castable FND

Urethane acrylate additive manufacturing resin

Tensile strengthGreen 40 MPa | Cured 42 MPa
Tensile modulusGreen 1710 MPa | Cured 2270MPa
Elongation at breakGreen 4.8% | Cured 2.7%
Viscosity at 25°C3.75 Ps

Crestaform® Castable FND should be stored in its original packaging in a dry and dark environment, out of direct light. It is recommended that the storage temperature be between 22°C and 35°C. Once opened, the material should be used immediately. If the material is not in-use, the material should be removed from vat/tray, filtered and returned to its original packaging to prevent dust or debris contamination. If the product has been stored below the recommended temperature, allow it to reach room temperature before use. To accelerate this process, the product may be warmed to a maximum of 40°C. Mix thoroughly and allow it to return to room temperature before printing.

The Crestaform® Castable FND must be disposed of in accordance with the local regulations.

For more information, please refer to the country specific SDS for advice.

Crestaform® Castable FND is supplied in 1kg and 5kg bottles. Bulk supply available.

Please see separate material safety data sheet