Crestakyd®

Crestakyd® 41-5009

A styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a versatile resin that will give paints a high-gloss finish and good resistance properties.
Download TDS

Crestakyd® 41-5009

A styrene modified resin alkyd

  • Shelf life12 months
  • Solids content60±1,5%
  • Viscosity at 25°C2000 - 3000 mPa s
  • Oil typeMixed non-yellowing
  • SolventXylene

A styrene modified resin alkyd

A universally employed resin in primers, enamels and hammer finishes. End uses vary from toys to marine deck paints and also office furniture, drums and agricultural machinery. CRESTAKYD® 41-5009 is ideally suited for a wide range of air-dry, low bake and general-purpose stoving industrial paints. Air-dry films dry to touch in 15-20 minutes, are hard dry in 25-30 minutes and yield high build and gloss. High standards of adhesion, cohesion and flexibility are achieved. Typical of many styrene modified alkyds there is a tendency towards sensitivity to re-coating a deficiency usually associated with drier concentration, film thickness and application conditions. CRESTAKYD® 41-5009 can be used for primers and other air-dry industrial. finishes.

Available in drums, IBCs and bulk deliveries by road tanker (please check with your local representative)

Stored between 0 and 30°C in the original, unopened container in a dry, well ventilated place. Exposure to direct sunlight should be avoided

Please see separate material safety data sheet

Ethical
purpose

Ethical
purpose

Every year, we donate a share of our profits to a huge range of charities globally.

Long-term local supply

Long-term local supply

We cannot be bought, so we are here to supply customers for the long-term.

Market leading products

Market leading products

92% of customers rate our product quality as excellent or good.

Similar products

Crestakyd® 30-9502

Crestakyd® 30-9502

A short oil, high solids, chain-stopped alkyd based upon linoleic-rich fatty acids, supplied in a 3:2 w/w blend of...

View Product Details
Crestakyd® 30-9055

Crestakyd® 30-9055

Specifically engineered to enable quick evaporation of the solvent phase during the drying or curing process. This...

View Product Details
Crestakyd® 30-5071

Crestakyd® 30-5071

Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather...

View Product Details
Crestakyd® 30-5068

Crestakyd® 30-5068

Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is...

View Product Details

Additional documents

  • scott-bader-functional-polymers-global-product-guide.pdf

    Download

Packing types

Cartridges

Holds 490ML

Pails

Holds 20L

Kegs

Holds 25KG

Drums

Holds 225KG

IBCs

Holds 1000L

Tankers

Holds over 1000L