Name: Texicryl® 13-023
Brand: Texicryl®
SKU: f1234b67-a5f8-49ad-a43c-5c1e490c39a0

Texicryl® 13-023

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, resulting in a high-performance water-resistant binder. This functional polymer is used in the manufacturing of high-performance ceramic tile adhesives, as well as mastic formulations, adhesives for expanded polystyrene tiles and glass fibre bonding tapes. Due to the nature of its special emulsifier system, Texicryl® 13-023 can be used with a variety of fillers including silicas, calcium carbonate and microdol. It is approved to meet the requirements for a range of UEATC and European standards, including CEN 1324 and EN 12004:2001. Texicryl® 13-023 has a good water holding capability and results in high-strength adhesive bonds, requiring a minimum film formation temperature of 27oC and a glass transition temperature of 30oC. Texicryl® 13-023 is ready to be supplied in drums or IBCs, with bulk deliveries being carried by road tanker.

Texicryl® 13-023

An aqueous dispersion of a modified styrene acrylic copolymer

Shelf life12 months
Solids content50%
Viscosity at 25°C95 mPa s
pH8
Minimum film formation temp27°C

An aqueous dispersion of a modified styrene acrylic copolymer

Texicryl® 13-023 can be used in the formulation of aqueous ceramic tile adhesives, which meet the requirements for UEATC and European standards (i.e, CEN 1324, 1.2 MPa after 7 days curing at ambient temperature followed by 7 days immersion in water). Texicryl® 13-023 can also be used in mastic formulations, adhesives for expanded polystyrene tiles and glass fibre bonding tapes. Texicryl® 13-023 has good water holding capability and gives adhesive bonds of high strength. Texicryl®13-023 is equally useful for formulating compounds for grouting ceramic tile adhesives

Texicryl® 13-023 is supplied in drums or IBCs (please check with your local representative). Bulk deliveries are by road tanker

Texicryl® 13-023 should be stored in the original, unopened and undamaged containers in a dry place at temperatures between 5°C and 30°C. Protect from freezing and direct sunlight

Please see separate material safety data sheet