- Home
- Markets & Products
- Texicryl® 13-218

Texicryl® 13-218
Texicryl® 13-218
Self crosslinking Styrene acrylic emulsion
Self crosslinking Styrene acrylic emulsion
Developed for use in surface bonding and through-bonding of synthetic fibre wadding. It will effectively prevent penetration of the fibres through the cover fabric, preserve the high loft of the wadding and facilitate handling during the making-up process. It has excellent heat and light-stability, as well as good wash and dry-clean solvent resistance.
Texicryl® 13-218 is widely used as a high-loft non-woven fabric binder. Drying and Curing Cure of emulsion binders is dependent on the polymer type, catalyst concentration, temperature and time.
Texicryl® 13-218 is supplied ready-catalysed and, after drying, must be cured for 2-3 minutes at 140°C. It is recommended that synthetic fibre waddings processed with Texicryl® 13-218 be dried and cured in hot-air ovens with efficient air movement to ensure removal of water vapour during the drying phase. When dried and cured under these conditions, Texicryl® 13-218 will confer dry-clean resistance, washfastness and good recovery from compression. Texicryl® 13-218 has an indefinite pot life at normal spray-bonding concentrations (10-25% solids content).
Texicryl® 13-218 has a non-detectable formaldehyde level according to Oeko-Tex® testing, ISO 14184-1 2011
Available in drums or IBC’s (please check with your local representative). Bulk deliveries are by road tanker
Store in the original, unopened and undamaged containers in a dry place at temperatures between 5°C and 30°C. Protect from freezing and direct sunlight
Please see separate material safety data sheet

Low VOC
Improved formulations for you and your customers.

APEO free
Delivering the same performance, but APEO free.

Versatile
Thickening performance for a broad range of formulations.