Name: Texipol 63-510
Brand: Texipol®
SKU: 87817ee8-acf0-4590-852d-69a4ecca0d2b

Texipol 63-510

For water-based adhesives and coating systems that require a highly viscous and creamy consistency, Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology with a viscosity of more than 100,000 mPa s. This thickener can also be used in aqueous blends with N-methylol pyrollidone and other polar solvents

Texipol 63-510

Ammonia free thickener for aqueous binder solution

Shelf life48 months
Viscosity at 25°C3000 mPa s
Specific gravity at 25°C1.05

Ammonia free thickener for aqueous binder solution

Can thicken both acidic and alkaline compositions and gives stable thickening in various organic acids such as citric and glycolic acid. It will also thicken phosphoric acid effectively. Thickening is normally achieved quite quickly, but in stronger acid and alkaline environments maximum thickening may take somewhat longer.

Has been used to thicken various water- based adhesives and coating systems where it gives an exceptional creamy consistency. It has also been possible to thicken aqueous blends with N-methylol pyrollidone and other polar solvents. Typical thickener dosages are 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels

Available in drums, IBCs and bulk deliveries by road tanker (please check with your local representative)

Store between 0 and 30°C in the original, unopened container in a dry, well ventilated place. Exposure to direct sunlight should be avoided

Please see separate material safety data sheet