Crestakyd®

Crestakyd® 41-6010

A styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a versatile resin that will give paints a high-gloss finish and good resistance properties.
Download TDS

Crestakyd® 41-6010

A styrene modified resin alkyd

  • Shelf life12 months
  • Solids content70 ± 1,5%
  • Viscosity at 25°C20 000 – 40 000 mPa s
  • Oil typeMixed non-yellowing
  • SolventSolvesso 100

A styrene modified resin alkyd

Suitable for air dry, low bake and general purpose stoving industrial paints. The resin is compatible with urea and melamine formaldehyde resins and is therefore suitable for stoving finishes. Excellent hammer finishes are achievable with the use of suitable aluminium pigments and silicone additives. Air-dry films based on this resin are touch-dry in 15-20 minutes and are hard-dry in 25-30 minutes.

Drier Recommendation: (1) For fast-dry and minimal overcoating problems : 0.03% cobalt on base resin. (2) For the fastest through-dry : 0.05% cobalt, 0.1% calcium, 0.2% zirconium all on base resin . Thinner recommendation; complete tolerance to aromatic hydrocarbons. Limited tolerance to aliphatic hydrocarbons, alcohols, ester and ketone solvents.

Available in drums, IBCs and bulk deliveries by road tanker (please check with your local representative)

Stored between 0 and 30°C in the original, unopened container in a dry, well ventilated place. Exposure to direct sunlight should be avoided

Please see separate material safety data sheet

Ethical
purpose

Ethical
purpose

Every year, we donate a share of our profits to a huge range of charities globally.

Long-term local supply

Long-term local supply

We cannot be bought, so we are here to supply customers for the long-term.

Market leading products

Market leading products

92% of customers rate our product quality as excellent or good.

Similar products

Crestakyd® 41-5009

Crestakyd® 41-5009

A styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a...

View Product Details
Crestakyd® 30-9502

Crestakyd® 30-9502

A short oil, high solids, chain-stopped alkyd based upon linoleic-rich fatty acids, supplied in a 3:2 w/w blend of...

View Product Details
Crestakyd® 30-9055

Crestakyd® 30-9055

Specifically engineered to enable quick evaporation of the solvent phase during the drying or curing process. This...

View Product Details
Crestakyd® 30-5071

Crestakyd® 30-5071

Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather...

View Product Details
Crestakyd® 30-5068

Crestakyd® 30-5068

Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is...

View Product Details

Additional documents

  • scott-bader-functional-polymers-global-product-guide.pdf

    Download

Packing types

Cartridges

Holds 490ML

Pails

Holds 20L

Kegs

Holds 25KG

Drums

Holds 225KG

IBCs

Holds 1000L

Tankers

Holds over 1000L