Products Contact Us

Texicryl 13-219

Texicryl 13-219 is a self-crosslinking styrene acrylic copolymer emulsion. With a viscosity of 200mPa s, pH of 7.0, particle size of 150nm, and solids content of 46%, it has been developed by Scott Bader for use in the manufacture of spray-bonded synthetic fibre waddings.

This binder has excellent heat and light-stability, and good wash- and dry-clean solvent resistance. When used in surface bonding and through-bonding, it will help to prevent penetration of fibres while preserving the high loft of the wadding. It is particularly ideal for use in window blinds and other fabric applications, as a stiffener.

Texicryl 13-219 must be cured for 2-3 minutes at 140°C and has an indefinite pot life when used at normal spray bonding concentrations. We recommend that synthetic fibre waddings processed with this acrylic dispersion are dried and cured in hot-air ovens to remove all water vapour during the drying phase.

Texicryl 13-219 copolymer emulsion is supplied pre-catalysed in drums or IBCs and can be purchased in bulk on request. Speak to your local Scott Bader sales representative for more information or download our textiles brochure below.

Data sheets


Contact Us